iPad Power Button Not Working or Stuck? Here's What to Do!

Part 1: Is The iPad Power Button Stuck or Not Working?

Now, there are two ways the power button on your iPad may malfunction - it can get stuck pressed in, or it can work physically but the system won’t respond to the presses any longer, pointing to underlying issues.

iPad Power Button Stuck

If your iPad power button is pressed and stuck, the only safe thing you can do at home is to try and pry it back up with a pair of tweezers, perhaps, and then attempt to blow air in the button cavity to try and dislodge any debris and gunk that might have caused the issue. Short of that, the only and the best option for you is to take it to an Apple Service Center for a look-see. However, if you are using a case on the iPad that may or may not be an Apple original case, you should remove that case and try again as sometimes, non-original cases are not designed to spec and may cause inconvenient issues such as this.

iPad Power Button Unresponsive

On the other hand, if your iPad power button is not working in the sense that it presses and retracts fine as before, but the system does not respond to the presses any longer, you are very likely to be in luck, because we can help you resolve that issue with a few simple solutions. A non-responsive power button means two things, either the hardware failed or there are issues with the software, and they can be fixed, giving you a working iPad power button once again.

Is your iPad power button not working? Here is a video you may be interested in:

4,624,541 people have downloaded it

safe & secure

Part 2: What Causes iPad Power Button to Get Stuck or Stop Working?

If you're an iPad user and have been experiencing issues with your power button, you're not alone. The power button is a crucial component of any device, as it allows you to turn it on or off. When it gets stuck or stops working altogether, it can be frustrating. In this article, we will explore some possible causes for the iPad power button being stuck or not working, so you can identify the problem and find a solution.

1. Physical Damage

One of the most common causes of a stuck or non-functioning power button is physical damage. If your iPad has been dropped or subjected to impact, it's possible that the power button has been damaged or dislodged. In such cases, you may need to have the button repaired or replaced by a professional technician.

2. Accumulation of Debris

Over time, dust, dirt, or other debris can accumulate around the power button, causing it to become sticky or unresponsive. This can happen if you frequently use your iPad in dusty or dirty environments. In such cases, you can try cleaning the power button using a soft cloth or a small brush. Be sure to turn off your iPad and disconnect it from any power source before attempting to clean it.

3. Software Issues

Sometimes, the power button may not work due to software issues. This can happen if your iPad's operating system is outdated or if there are bugs or glitches affecting the power button's functionality. In these cases, it's advisable to update your iPad's software to the latest version or perform a factory reset to resolve any software-related issues.

4. Wear and Tear

Similar to any physical button, the power button on your iPad may experience wear and tear over time. Constant usage can cause the button to become less responsive or get stuck. If this is the case, you may need to have the power button replaced. Again, it's best to seek professional assistance for this type of repair.

5. Moisture Exposure

Moisture exposure can also lead to a malfunctioning power button. If your iPad has come into contact with water or any other liquid, it can cause the internal components, including the power button, to corrode or short-circuit. In such instances, it's crucial to power off your device immediately and seek professional help to assess and repair the damage.

Part 3: How to Fix iPad Power Button Not Working or Stuck

Well, if removing the case helped you get your stuck iPad power button working again, great! For the ones with a non-responsive power button, it may be caused by software issues. There are a few ways you can try and fix the iPad power button not working issue.

Fix 1: Restart iPad

Now, you would wonder how you would restart your iPad without the power button. As it turns out, Apple did include a way to induce a restart using software, power button is not needed. Here’s how to restart the iPad in iPadOS:

• Step 1: Launch Settings and tap General.
• Step 2: Scroll down till the end and tap Transfer or Reset iPad.
• Step 3: Tap Reset.
• Step 4: Choose Reset Network Settings.

What this option does is reset your network settings and restart the iPad. When the iPad restarts, you will have to set the iPad name again if you want to and will have to key in your Wi-Fi password again. Why did we not use the Shut Down option just below Transfer or Reset iPad? Because, as the name suggests, it would shut the iPad down and without the power button you cannot restart it.

Tip: You can also use AsstiveTouch to restart your iPad.

Fix 2: Reset All Settings

Resetting the network settings, in this case, was a means to restart the device. Network settings will have no effect on the power button specifically. However, resetting all settings on the device can have an effect. Here’s how to reset all settings on the iPad to try and get the iPad power button not working issue resolved.

• Step 1: Go to Settings and tap General.
• Step 2: Scroll down and tap Transfer or Reset iPad.

• Step 3: Tap Reset and choose Reset All Settings.

This will reset all settings on the iPad, and this might help fix whatever is causing the power button to become unresponsive.

Fix 3: Erase All Content And Settings

So far, all fixes has been non-disruptive as they have not caused any major headaches and data loss. All they have been doing is either a restart or resetting settings. This one, however, is going to be more disruptive since it wipes out the iPad and removes everything from the device, resetting it to factory defaults as if you opened it brand new, out of box. This is one of the ways to help you clean the settings out more thoroughly. Please note that you will need to set your iPad up again as you did when you bought it.

• Step 1: Go to Settings and tap your profile picture.
• Step 2: Tap Find My and disable Find My for your iPad.
• Step 3: Go back to main settings page and tap General.
• Step 4: Scroll down and tap Transfer or Reset iPad.
• Step 5: Tap Erase All Content and Settings.

Proceed with instructions to continue. This is the most thorough way you can clean up the iPad and its settings, short of fully restoring the firmware again.

Fix 4: Update/Reinstall Firmware via iTunes or Finder

Sometimes, reinstalling the firmware can help fix stubborn issues. Here’s how to check for updates and reinstall iPadOS.

• Step 1: Connect your iPad to the Mac or PC.
• Step 2: Depending on your operating system, you will either see Finder open, or iTunes if on lower macOS versions or PC.
• Step 3: Tap "Check For Update" to see if there is an update available for iPadOS. If there is, follow those instructions to proceed and install it.
• Step 4: If there is no update, click the "Restore iPad" button beside the "Check For Update" button.

• Step 5: Click "Restore" again to start the process.

The latest firmware will be downloaded and installed on the iPad again. After everything is done, the iPad will restart, and you will hopefully have your iPad power button stuck or not working issue resolved.

Fix 5: Use Dr.Fone - System Repair (iOS) For A Better Experience

Dr.Fone is a third-party tool developed by Wondershare Company that helps you fix all issues with your smartphones. This is a module-based software, so you do not get lost in complexities and options, all you get is the simplest possible design and UI for each job owing to the razor-sharp focus of each module. What this section is about is System Repair module, that can help you fix the iPad power button not working issue.

Dr.Fone - System Repair

Repair iOS System Errors to Fix iPad Power Button Not Working or Stuck.

• Only fix your iOS to normal, no data loss at all.
• Fix various iOS system issues stuck in recovery mode, white Apple logo, black screen, looping on start, etc.
• Downgrade iOS without iTunes at all.
• Works for all models of iPhone, iPad, and iPod touch.
• Fully compatible with the latest iOS version.

Available on: Windows Mac

Try It Free

Try It Free

3981454 people have downloaded it

• Step 1: Connect your iPad and launch Dr.Fone and click "System Repair".
• Step 2: After selecting the System Repair module. It opens to two options, "Android" and "iPhone". Click "iPhone" > "iOS Repair".

• Step 3: System Repair has two modes – Standard Repair Mode and Advanced. Standard Mode attempts to fix any issues with the software without removing user data. Advanced Mode performs a thorough system repair and removes all user data. You can choose "Standard Repair" first, then put your iPad into Recovery Mode. After that, you will reach here:

• Step 4: Dr.Fone System Repair will detect your device model and software version. You can select the firmware available. Click "Download" to start the firmware download process. After download, the tool verifies the firmware file, and presents you with this screen:

• Step 5: Click "Repair Now" to start fixing your iPad power button not working issue. When done, this screen will show:

Now, you can disconnect your device and see if the power button is working as usual.

safe & secure

Fix 6: Assistive Touch Hack

Even in the shadow of the pandemic, we do not have enough time for everything, especially going out. We are working from home; we have countless other things to do every day. If none of the above helped, you can’t be expected to just get up and walk into the nearest Apple Store, no matter if that were exactly what Apple would like you to do. Firstly, your day is disrupted, and secondly, they will keep your iPad with them while they fix it. So, while you are busy with your schedule and can’t make time to visit the Apple Store to get your iPad checked out or can’t hand the iPad over for repair just yet, what do you do? You use the Assistive Touch feature in the iPad to get you by until you have time and can get the iPad checked at the Store.

Here’s how to use Assistive Touch on the iPad to get a virtual button that functions both like a home button and power button:

• Step 1: In Settings, to go General > Accessibility.
• Step 2: Tap Touch > AssistiveTouch and toggle it On.

Tip: You can also speak out, “Hey Siri! Turn on AssistiveTouch!”.

• Step 3: You will see a translucent home button appear onscreen. Customize the button if you want from the options in Settings > Accessibility > Touch > AssistiveTouch if you weren’t in Settings already.

Now, when you tap the button, you can use it for functions that would require the power button, such as restarting, locking the screen, taking screenshots, etc.

How to use AssitiveTouch to restart iPad?

• Just click AssitiveTouch on the home page > click "Device" > tap "More" to find the "Restart" button.

Conclusion

It’s just how we have come to be, we now rely on electronics for nearly everything. That means that the smallest of failure has the power to disrupt our lives. The iPad Power button not working or stuck power button can give us worry as we fear and impending disruption to our workflows, afraid of the struggle we would undergo to manage time. However, help is at hand. If the iPad power button is jammed, you can try removing all cases and prying with a pair of tweezers. If the iPad power button is not working, you can try restarting, resetting settings, using Dr.Fone - System Repair (iOS) to help fix the iPad power button not working issue. If nothing helps, you will have to take the iPad to the service center, but meanwhile, you can also use Assistive Touch to get you by.

4,624,541 people have downloaded it

safe & secure