Top 12 Prominent Pixel 7 Fingerprint Not Working Solutions

Part 1. Optimal Solution: Unlock With Wondershare Dr.Fone Directly

Facing a malfunctioning fingerprint on your Google Pixel 7 can be frustrating. In this scenario, the most effective resolution is the removal of the registered fingerprint. Yet, traditional methods of removing the fingerprint can be difficult and pose security risks. In this case, going for tools like Wondershare Dr.Fone is the best choice. This tool ensures your Pixel device is at no risk.

Dr.Fone offers a swift solution to remove the Android lock screen in five minutes. It effectively removes 4 types of screen locks. These include patterns, PINs, passwords, and fingerprints. Dr.Fone can bypass the Android FRP lock without needing a PIN or Google account. It ensures accessibility to the Android device without such credentials.

Dr.Fone - Screen Unlock (Android)

The Best UnlockJunky Alternative to Bypass FRP and Solve Your Screen Locks

• Remove all Android screen locks (PIN/pattern/fingerprints/face ID) in minutes.
• Bypass the FRP lock of Samsung without a PIN or Google account.
• Everyone can handle the lock screen without any tech knowledge.
• Provide specific removal solutions to promise good success rate.

Available on: Windows Mac

Start Download

Start Download

4,624,541 people have downloaded it

Prominent Features of Wondershare Dr.Fone

1. FRP bypass is enabled for brands like Samsung, Xiaomi, Redmi, Oppo, Realme, and Vivo.
2. With Dr.Fone, bypassing screen locks can be achieved without data loss.
3. Fone supports 2000+ Android phones and tablets from over 18 brands for screen unlocking.

Step-by-Step Guide To Remove Fingerprint Type Lock on Google Pixel Using Dr.Fone

With Dr.Fone, you can resolve the Pixel 7 fingerprint sensor not working issue within minutes. Below is a detailed walkthrough for removing a fingerprint lock on a Google Pixel:

Open Wondershare Dr.Fone and connect your Android device via a USB cable. Once the connection is established, navigate to the "Toolbox" tab and choose "Screen Unlock." Upon reaching the new screen, choose the “Android” option. Then, select “Unlock Android Screen” from the options on the following screen.

safe & secure

Afterward, you'll be guided to a subsequent screen prompting you to choose the device brand, Google. Once you select the brand, you'll be directed to enter a specific mode corresponding to it. For Google Pixel Devices, the specific mode to enter is Recovery Mode. Simply follow the on-screen instructions to activate Recovery Mode on your device.

After entering Recovery Mode, the screen unlocking procedure will initiate automatically. Please wait for the fingerprint removal process to finish. In case of failure, select "Try Again" to attempt unlocking again. Upon successfully unlocking your Android device's screen, tap "Done."

Part 2. 11 Conventional Solutions To Resolve Pixel Fingerprint Not Working

The solution above using Wondershare Dr.Fone is an effective and comprehensive method. It can tackle fingerprint recognition issues, but sometimes, users may look for simpler alternatives. We will explore conventional solutions that can address Pixel fingerprint problems. Each solution will also explain the underlying reasons for the Pixel 6 fingerprint sensor issue.

1. Fingerprint Sensor Not Touched Firmly

Problem

If the fingerprint sensor fails to recognize your fingerprint, it might be due to inadequate pressure. This could also be due to improper finger placement on the sensor.

Solution: Firm Placement

Ensure you firmly place your finger on the sensor, covering it entirely. Avoid too much pressure, but make sure the sensor fully contacts your fingerprint.

2. Device Showing Glitches

Problem

Glitches or software bugs in your Pixel device may cause disruptions. This can include issues with the fingerprint sensor's functionality. These problems can range from minor issues to severe software glitches.

Solution: Restart Your Pixel Device

One of the easiest and simplest solutions is to restart your Pixel phone. You can do that by pressing the "Power" and the "Volume Up" keys. It will lead to a pop-up power menu where you must choose "Restart" to reboot your device.

3. Outdated Firmware

Problem

An outdated operating system or firmware can lead to compatibility issues. This can lead to malfunctioning features like the Pixel 6A fingerprint sensor not working.

Solution: Check for Updates

The best way to resolve this issue is to update your Pixel device. Having an outdated version of Android OS can lead to an accumulation of bugs and glitches. Moreover, it can seriously affect the device's performance, causing many issues. Here is how to check and update your Pixel phone:

Instructions. On your Pixel device, access the “Settings” app. Within Settings, scroll down to tap the "System" option. On the following screen, hit the "System update" option to check if any latest update is available. Here, if you see any updates, download and install them promptly. Before initiating the update, ensure your device is connected to a stable Wi-Fi network with sufficient battery charge.

4. Dirty Phone or Sensor

Problem

Accumulated dirt, dust, or residue on the phone or fingerprint sensor can cause obstruction. This can lead to the failure to properly recognize your fingerprint.

Solution

1. Cleaning the Phone

Employ a gentle, dry microfiber cloth for wiping down the complete surface of your Pixel device. Take particular care to thoroughly clean the region surrounding the fingerprint sensor. Refrain from utilizing rough substances or strong chemicals as they could potentially cause harm to the device.

2. Fingerprint Sensor Cleaning

Gently wipe the fingerprint sensor area using a clean, dry cloth to ensure thorough cleaning. For better results, consider using a dampened cotton swab with water or isopropyl alcohol. Before using it again, ensure the sensor is entirely dry.

3. Compressed Air or Soft Brush

Use compressed air or a soft brush if there's visible debris or particles around the sensor. Be cautious not to apply excessive pressure that might damage the sensor.

5. Screen Protector: Dirty or Damaged

Problem

A smudged or impaired screen protector might disrupt the working of the fingerprint sensor. This can potentially cause it to fail to recognize your fingerprint.

Solution

1. Clean the Screen Protector

Start by effectively cleaning the screen protector on your Pixel device. For a thorough cleaning, consider utilizing a screen cleaning solution. Ensure that the screen protector is free from any dirt or debris.

2. Replace Damaged Protectors

Is the screen protector visibly damaged, scratched, or peeling off? If yes, consider replacing it with a new one. Damaged protectors can hinder fingerprint recognition and compromise device protection.

3. Check Compatibility

Ensure the screen protector is designed to be compatible with fingerprint sensors. Some protectors may obstruct or interfere with the sensor's functionality.

4. Remove Air Bubbles

There can be air bubbles trapped under the screen protector. If there are, gently press them out towards the edges using a card designed for this purpose.

6. Clean Your Finger

Problem

The problem may lie with your fingers rather than the device. Unclean or moist fingers can hinder accurate fingerprint recognition on the sensor, causing the Google Pixel 7 fingerprint sensor to not work.

Solution

1. Cleanse and Dry Your Hands

Remove any dirt, oil, or moisture that might cause issues with the fingerprint sensor. It's crucial to wash and thoroughly dry your hands. Additionally, verify that your fingers are entirely dry before engaging the sensor. The reason is any moisture or dampness may cause inaccuracies in fingerprint identification.

2. Avoid Oily or Greasy Substances

Refrain from touching oily or greasy surfaces before using the fingerprint sensor. These substances can transfer onto your fingers, affecting sensor accuracy. If your fingers are dirty or damp, pause to clean them using a dry, clean cloth.

7. Covering Screen if Fingerprint on Screen

Problem

Fingerprint marks or smudges on the screen might disrupt sensor functionality. This leads to inaccurate recognition when you try to unlock your device.

Solution

1. Avoid Covering the Sensor Area

Be cautious while cleaning the screen to avoid covering or smudging the area around the fingerprint sensor. Precise cleaning around this area prevents interference with sensor functionality.

2. Use Proper Holding Technique

While holding the device, avoid placing your fingers or palms over the fingerprint sensor. Opt for holding the device to minimize accidental contact with the sensor area.

8. Fingerprint Sensor Not Visible

Problem

Misconfigured settings on your Pixel device can lead to situations where the fingerprint sensor is not visible. It can lead to scenarios where the device fails to recognize your screen unlocking attempt.

Solution: Adjust the Setting To Consistently Display the Sensor

You must adjust the display settings to ensure the fingerprint sensor is always visible. To do that, you can begin by opening the Settings app. Navigate to the "Display" tab and select "Lock Screen." On the following window, toggle on "Always show time and info."

9. Low Touch Sensitivity

Problem

The fingerprint sensor may have low touch sensitivity. It can lead to difficulties in accurately recognizing fingerprints, leading to Google Pixel 7 fingerprint not working.

Solution

1. Adjust Sensitivity Settings

Accessories like a screen protector might impact the performance of your Pixel device's touch sensitivity. When using a screen protector, your Pixel enhances touch sensitivity. To do that, navigate to the Settings app and open it. Move to the "Display" window and scroll down to the last option. Toggle on the "Screen protector mode" to increase the screen sensitivity.

2. Finger Re-Enrollment

Delete existing fingerprints and re-register them. This re-enrollment can sometimes improve sensitivity and help remove the issues. Here is how you can delete and re-enroll your fingerprint:

10. Other Hardware Issues

Problem

Persistent fingerprint sensor problems might indicate underlying hardware issues. This could go beyond common troubleshooting and might require professional help.

Solution

1. Inspect for Physical Damage

Thoroughly examine your Pixel device for any physical damage. These include cracks, dents, or scratches around the fingerprint sensor area. Physical damage could affect the sensor's functionality.

2. Safe Mode Check

Boot the device in safe mode to determine if third-party apps are causing conflicts. To do that, press the "Power" key with any volume key to access the power menu. Afterward, long-press the "Power Off" option until the "Reboot to Safe Mode" option appears on your device's screen. Press "OK" to reboot into Safe Mode and test the fingerprint sensor's functionality.

3. Professional Assessment

If you suspect hardware issues, seek professional help from authorized service centers. A clear sign of hardware issues can be visible damage or the sensor failing to function even in safe mode.

11. Factory Reset as Last Resort

Problem

Did all other troubleshooting methods fail to resolve persistent fingerprint sensor issues? Then, a factory reset might be required to revert the device to its original settings.

Solution

1. Backup Data

Before initiating a factory reset, ensure that all crucial data is safeguarded. This encompasses contacts, photos, documents, and any other significant files. Use Google's backup services or third-party apps to securely back up your data.

2. Initiating Factory Reset

Proceed with the following steps to execute a factory reset on your Pixel device: